Every year, I dress up for the runDisney Princess half marathon. For the past couple of years, my friend Jen and I have been super creative with matching costumes, but this year we both had a lot going on, and February snuck up on us. We still wanted to dress up and “sort of” match, so we decided to go with clothing we already owned so that we just had to add a couple of accessories to our princess costumes.
I already had a yellow running skirt and blue top, so I thought Snow White would be “easy”, except I totally forgot I am the least artistic person on earth and nothing related to costume creation is ever easy for me.
I had seen a few similar costumes on Pinterest, and thought I could figure out a way to create the sleeves on my own, but still look just as good as people with sewing machine today (and sewing skills). Yall, I tried really hard. If you didn’t get too close to me at the race you never would have known, but the photos below clearly show off my skills. But if you want an easy(er) way to create these sleeves and don’t have a sewing matching but own a needle and thread (or can buy one), then my tutorial is for you. remember, if I can do this, you can do this.
SUPPLIES:
-blue tank (mine is cotton from Target, I got it on clearance for $3. I know cotton is a running no no, but I wasn’t spending any more money on this costume than I had to.
-yellow running skirt from runningskirts.com. My favorite brand. They have POCKETS which is a great help during a race. (affiliate link)
-red headband or ribbon (I got mine at Mouse Gears inside EPCOT for $12.95. I love it so much I wore it around the parks, too!) You could always use leftover ribbon from your sleeves to create a bow or headband, too.
-needle
-white and blue thread
– 1 yard of knit elastic
– 2 yard of 1 inch thick blue ribbon
-2 yards of 1 inch thick red ribbon
– push pins
WARNING: Do not get ribbon with wire. It will poke you the whole race. The only thinner red ribbon at my craft store had wire so I bought it. Don’t make my mistake!
The first thing you need to do for your sleeves is cut two pieces of elastic and sew them together for the bottoms of the sleeves.
WARNING: Make the fit snug, but don’t cut off circulation. I made the mistake of making mine too loose, and it started pulling down the straps of my tank b/c the elastic was sliding down my arms. If I were to do this again (haha) I would have done the elastic a little tighter.
All I did was used white thread and literally sewed the two ends together at the ends. That’s it. Nothing fancy or pretty. I figured no one would be close enough to see that it didn’t all line up perfectly.
Then came the more complicated part. I knew I wanted 3 red pieces and 2 blue pieces of ribbon on each arm. So I did the longest 2 pieces in the middle then shorter pieces after that with one of the pieces more in the front than back. Confusing? Maybe this helps. For each arm I cut:
-1 red 10” and one blue 10”
-1 red 9” and one blue 9”
-1 red 8” <—-to be closer to the front. I didn’t care about having ribbon more towards the back. Check it out below. I then took each piece and pinned it to my elastic. I personally did it so that the seam of the elastic was on the back of my arm and not underneath so it wouldn’t rub me when I ran. Then I kind of “pleated” each piece of ribbon (best I could, it’s hard yall), and pinned them all on so that the ribbon reached about halfway down the width of the elastic (don’t worry, this is the underside that no one will see!)
Then I got to sewing. Well, what resembled sewing. Don’t laugh. This is the final product. I used white thread and just started on one side and literally just sewed over and under all the way across. It looked AWFUL, but again, would be on the underside.
I then did the same exact thing to the other side, so I had two detached sleeves.
I then switched to my blue thread, and again just literally sewed a line down the inside of the sleeve of the tank, attaching each piece of ribbon with about 3-4 stitches as I went. It wasn’t the best hold ever, but would do for one race. I did the other sleeve (make sure you sew underneath and not on top of the tank!) and I was done!
I didn’t try it on b/c I was afraid I would rip/mess something up, but thankfully all went well on race day and it held together just fine! I got tons and tons of compliments, but really all I did was sew together some ribbon and buy a headband. Everything else I already had. Some people choose to do a cape and collar or hold an apple, but I knew a cape and collar would bug me, and I already hold my phone when I run so I didn’t want to bother with another prop. So there you have it! My Snow White runDisney costume!
QOTD: Have you ever dressed up for a race?
Get Your Free Printable Set!
Sign up to get my free printables on goal setting & fitness tracking.
For future reference, for you find ribbon with wire you can get tweezers and pull the wire out. Sometimes you can also pull it out with your fingers but tweezers make it easier. ? Super cute costume! I got to start working on my dark side costume… trying to think if I can get away with a non- Star Wars one…
If I had realiZed they were going to bother me I would have, but I didn’t put on my shirt till the morning of since I was afraid t was going to fall apart. Definitely a risky move!
I always dress up for Disney. I also have very limited crafting skills but coming up with these costumes have definitely made me more confident. A bucket list item that I just added is..learn how to sew. I have done Belle, Snow White, “England”, Sebastian, Minnie, Tigger, and Stitch (and more). So fun!
I dressed up as Princess Vanellope (pink dress) for the 10K and Belle (in her burgundy and gold dress) for the 1/2. I was sewing til the last minute the night before because I procrastinated way too much this year! Oh, and I don’t think anyone got who I was either. ?
Oh no haha! I definitely made my costume the day before I left!